Removal Oil
2010-11-04 12:03
resource:http://www.bic-iwhr.comRemoval Oil Introduction:
Removal Oil Technical Characteristic:
Continuum Filtration:
The plant does not need to stop running to back-washing or replacement filter material
Removal Oil Process is simple:
The equipment uses small pump, does not need add the chemical medicine, the running cost is very low
Adjustable Filter Precision:
According to the use and requirement, the plant can change the filter precision easily
Processing effect is stable:
In the process of using of Oilfield wastewater treatment plant, filtration equipment needs cleaning or replacement before it reuse, Operational cycle of early stage and the last stage of product water often fail to design’s requirements.
The plant is reliable and safe, and it is advantageous for the automatic control,it realizes the non-humanization control
The plant which is continuous running does not need back-washing after filtering; it mostly suits for the small block oil to processing and re-injection
Removal Oil Technical process:
The plant which is continuous running does not need back-washing after filtering; it mostly suits for the small block oil to processing and re-injection
Removal Oil Technical process:
Major technical parameter of Influent & effluent:
| NO. | Item | Technical parameter |
| 1 | Water quantity（m3/h） | 5 10 15 25 50 100 150 200 |
| 2 | Running Pressure（MPa） | 0.6 |
| 3 | Running Temperature（℃） | ≤80 |
| 4 | Influent oil concentration (mg/L) | ≤20～1000 |
| 5 | Influent SS concentration (mg/L) | ≤10～300 |
| 6 | Effluent oil concentration (mg/L) | ≤5～60 |
| 7 | Effluent SS concentration (mg/L) |
≤1～30
|
| 7 | Effluent particle size’s Average value (µm) |
≤1～5 |
Plant’s structure
Example of Removal Oil Project
① The Sampling test result of Processes the Shuang’he sewage
| Sampling(mg/L) | Point Oil Concentration (mg/L) | SS Concentration |
| Influent | 239.00～3018.00 | ≥30.00 |
| Effluent | 0.00～8.46 | ＜3.00 |
②The Sampling test result of Processes the An’peng sewage
| Sampling(mg/L) | Point Oil Concentration (mg/L) | SS Concentration |
| Influent | 11.00～168.71 | ≥30.00 |
| Effluent | 0.88 ～5.35 | ＜3.00 |
Recommended reading
Beijing IWHR Corporation
